Accepting One-Click Payments

Save your customers' card details to receive One-click Payments

Web

iOS

Android

This functionality is available for the following models:

☑ Acquirer

☑ Aggregator

Kushki allows you to securely store a customer's card details, without necessarily charging an initial fee, and then allow them to make One-Click Payments to speed up the checkout process.

If you are looking for automatic recurring payments check out our guides.

To keep in mind

Due to our risk policies, the available payment methods and the integration type may vary once you complete the affiliation. We will tell you how to proceed if this process applies to your merchant.

How does it work?

Storing credit card details on your website means capturing the card details, generating a token and sending the information to Kushki for storage, where a subscription identifier will be created for the card. Then, with that identifier, you will be able to make One-Click Charges from your back end as required.

If you are interested in capturing debit card details, check our documentation to Generate one click payments using Webpay Oneclick.

When registering, a charge will be made to the customer's card for a small amount (50 CLP) that allows us to verify that the card is active and its account has a balance. This charge will be automatically reversed.

Basically, integrating One-Click Charges consists of 2 stages: Registration and charge

The flow that you will integrate is shown below:

1. Registration

The first thing you need to do to generate One-Click Charges is to register your customer's card. To do so, follow the steps below:

Set up your front-end

The front-end is responsible for collecting the user’s card details securely, generating a token for such information through Kushki’s servers, and then sending that information to the back end to start the card registration process so that you can charge later.

Kushki.js

Use Kushki.js to have more control over the "look & feel" or appearance of your card form.

Important

Using this method requires a stricter assessment by our agents.

Set up Kushki.js

Option 1 - CDN

Use the following script tag at the end of the <body> of your payment page.

Option 2 - NPM

Install the package from npm.

Then import it in your code using the following code.

Set up `Kushki` object

Add the following code to your application

Collect User Information and Send it to your Back-end

First, embed the form in your payment page adding the required fields. You can design it in the way that best suits you.

For example:

Display the deferred options according to the BIN of your customer’s card (Optional)

As soon as your customer's card number is entered, you should check the method of deferred request to verify if there are deferred payment options for the BIN of the card entered by the user.

In response to this call, you will receive the type type, the available months and the months of grace, as shown in the following example response. To execute the charge you should use only months.

  {
      type: "all",
      months: ["2", "3", "4", "5", "6", "7"],
      monthsOfGrace: []
    }

Important

The deferred options that are available to your customer will depend on the credit card BIN's.

According to the response, the payment form shows the information of deferred options that your customer has available. Make sure to capture their choices, and send them in turn along with the payment details in the deferred object when you start the payment process with Kushki.

And, for the moment the user submits the form, add the token request and take it to your back-end.

Check the full reference on our Kushki.js reference

Kushki.js Hosted Fields

Product in beta version 🔐

We are working on our beta version. Stay tuned for its official release! You can also contact your account manager for more information.

With Hosted Fields, included in Kushki.js, you can securely collect customer payment information through fields stored on Kushki infrastructure. Returns a token which allows the payment flow to continue from the back-end.

Import Kushki.js Hosted Fields into your app

Option 1 - CDN

Import the Kushki.js Hosted Fields library into your application via a <script> tag inside the <body> tag. Once imported, you will be able to access the resources described below to create a payment flow with Kushki.

It is necessary to import the libraries kushki.min.js (which brings the necessary code to store your merchant's credentials) and card.min.js (the module that brings the necessary functionalities for the flow with card payments).

Option 2 - NPM

Install the Kushki.js Hosted Fields library as an npm package inside your application with the following code:

Option 3 - YARN

Install the Kushki.js Hosted Fields library as a yarn package inside your application with the following code:

Create an instance of `KushkiOptions`

To use the Kushki.js Hosted Fields library, it is necessary to create an instance of KushkiOptions which allows you to set the public key of the work environment (test or production) through the init() method.

Note: When you are ready to accept real payments, you need to replace the test key with the production key.

Add the following code to your application:

Check the reference for more information about the KushkiOptions instance.

Initialize the form on the front-end

Follow the steps below to render the hosted fields. This way, your clients will be able to enter the necessary data to carry out transactions.

Step 1. Define containers for hosted fields.

Before calling the initCardToken() method, it is required to place the necessary elements to be able to render each hosted field.

Step 2. Create an instance of `CardOptions`

Create an instance of CardOptions with the transaction information, such as the amount, currency, among other parameters.

Note: To create a subscription you need to send the isSubscription property with a value of true.

Step 3. Render hosted fields with the initCardToken() method

After creating an instance of CardOptions, you need to call the initCardToken() function to initialize an instance of ICard.

Check the reference for more information on form initialization.

Request a token to continue the payment flow

Request a card payment token that you can later use to make an One click payment.

To obtain a card payment token, it is necessary to call the requestToken() method on the previously initialized card instance. This method performs 3DS and Sift Science validations automatically. Also, validate that all the fields are correct; otherwise it will throw an exception.

Note: If the deferred option is available for your merchant, the deferred object will be returned along with the token. The fields available within deferred vary depending on the country. Consult the reference for more information on deferred.

Once the token is obtained, send it to your back-end to continue the payment flow.

See the reference for more information about the token request.

Set up your back-end

The back-end is responsible for receiving the token obtained from your front-end and starting the card registration process with Kushki.

When the user submits the form, your front end sends a token to an endpoint that you specified previously. Using this token, you must make a call to our card registration endpoint to register the card.

Important

It is important that you define the periodicity variable periodicity as custom, because otherwise you will charge your customer on a recurring basis. For more information, see our recurring payment guides.

JavaScript

Python

PHP

Check our API Reference for more information.

According to the response you obtained, redirect the user to a success or failure page to inform the customer whether the registration was approved or declined.

2. Charge

Once you have already registered your customer's card, in order to make a charge, it is necessary to perform these simple steps, using the subscriptionId.

Set up your front-end

Kushki.js

We will take advantage of the fact that our Kushki.js library has been imported and set up previously to use a method that will be very helpful to verify the reliability of the charge.

Generate a charge token and send it to your back-end

First, it is necessary to obtain the subscription ID of the card that will be charged.

Then, request the charge token, and send it to your back-end.

Check the full reference on our Kushki.js reference

Kushki.js Hosted Fields

To process a one-click charge and obtain the deviceToken, you have two options:

Without CVV validation in a hosted field: You can obtain a token by calling the requestDeviceToken() method and sending the previously generated subscriptionId.

With CVV validation: This method uses a hosted field to validate the CVV.

Option 1. requestDeviceToken()

To process a one-click charge without CVV validation in a hosted field, you must call the requestDeviceToken() method and send the previously obtained subscription ID.

Option 2.Secure DeviceToken()

If you need to validate the CVV when performing a one-click payment, call the Secure DeviceToken method. This is the second method to obtain a deviceToken, but it uses a hosted field to validate the card's CVV.

Form creation

You must define the container where the field to enter the CVV value will be displayed.

Display the CVV field

Create an instance of SecureDeviceTokenOptions to render the hosted field for entering the CVV.

2.1. Call the `initSecureDeviceToken()` method.

Call the initSecureDeviceToken() method, which renders a hosted CVV field and initializes an instance of ICardSubscriptions.

2.2. Call the `requestDeviceToken()` method

To get a secure deviceToken, you must call the requestDeviceToken() method on the previously initialized card subscription instance.
This method also validates whether the CVV field is valid; otherwise, it will throw an exception.

Check here for the full library reference and more information.

Set up your back-end

Once the charge token has been received, simply call our charge endpoint along with the subscriptionId as you deliver your service to your customer under the logic you define.

If you wish to receive a deferred payment in installments, make sure to send the deferred object with the months parameter, along with the collection information, as shown in the example below:

JavaScript

Python

PHP

Check our API Reference for more information.

Important

The deferred object should only be sent in cases where the card has the possibility of making deferred payments, in all other cases, such object should be omitted.

Cancel a registration (Optional)

If your customer decides to cancel the service or once you stop providing it, in order to cancel the card inscription, simply call our inscription cancellation endpoint from your back-end.

JavaScript

Python

PHP

3. Test your Integration

In order to test the receipt of installment (deferred) payments, an additional setup by the Kushki team is required.

You can use some test cards in test mode to ensure that your integration is ready. Use them with any CVV and a future expiration date.

Approved transaction: 5451951574925480

Transaction declined during token request (front end): 4574441215190335

Transaction declined during charge request (back end): 4349003000047015

4. Prepare your Certification

Read the following guidelines for technical certification approval (required to obtain productive account credentials):

Tax calculations must be correct.

Sensitive card details are not stored in your database (full card number, CVV, etc.).

Messages displayed on the screen are in line with Kushki’s responses.

All Kushki responses must be saved and recorded (required in case you need support).

Kushki's logo must be visible to the customer. You can find our logo in several formats here.

Make sure to send all the required data as specified in the API Reference.

If you are using Kushki.js, also check the following:

The cardholder's name must be required.

The card number field must be required.

The card number field must only accept numbers.

The credit card field must allow a maximum of 16 digits (there may be less).

The CVV field must be required.

The CVV field must accept only numbers.

The CVV field must allow no more than 4 digits and no less than 3 digits.

The CVV field must be of password type.

The expiration date must be required.

The expiration date must accept only future dates.

The payment button must be disabled after the first click.

Kushki's logo must be visible to the customer. You can find our logo in several formats here.

Make sure to send the contact details of your customer-payer (contactDetails), together with the billing details (orderDetails -> billingDetails) and shipping details (if your business model requires it: orderDetails -> shippingDetails), within the request to make the charge. The example of the Body of JSON for the charge can be found at API Reference.

Accept Webhooks

Manage correctly post-payment events.

Accepting One-Click Payments

How does it work?#

1. Registration#

Set up your front-end#

Kushki.js#

Set up Kushki.js#

Option 1 - CDN#

Option 2 - NPM#

Set up Kushki object#

Collect User Information and Send it to your Back-end#

Display the deferred options according to the BIN of your customer’s card (Optional)#

Kushki.js Hosted Fields#

Import Kushki.js Hosted Fields into your app#

Option 1 - CDN#

Option 2 - NPM#

Option 3 - YARN#

Create an instance of KushkiOptions#

Initialize the form on the front-end#

Step 1. Define containers for hosted fields.#

Step 2. Create an instance of CardOptions#

Step 3. Render hosted fields with the initCardToken() method#

Request a token to continue the payment flow#

Set up your back-end#

2. Charge#

Set up your front-end#

Kushki.js#

Generate a charge token and send it to your back-end#

Kushki.js Hosted Fields#

Option 1. requestDeviceToken()#

Option 2.Secure DeviceToken()#

Form creation#

Display the CVV field#

2.1. Call the initSecureDeviceToken() method.#

2.2. Call the requestDeviceToken() method#

Set up your back-end#

Cancel a registration (Optional)#

3. Test your Integration#

4. Prepare your Certification#

How does it work?

1. Registration

Set up your front-end

Kushki.js

Set up Kushki.js

Option 1 - CDN

Option 2 - NPM

Set up `Kushki` object

Collect User Information and Send it to your Back-end

Display the deferred options according to the BIN of your customer’s card (Optional)

Kushki.js Hosted Fields

Import Kushki.js Hosted Fields into your app

Option 1 - CDN

Option 2 - NPM

Option 3 - YARN

Create an instance of `KushkiOptions`

Initialize the form on the front-end

Step 1. Define containers for hosted fields.

Step 2. Create an instance of `CardOptions`

Step 3. Render hosted fields with the initCardToken() method

Request a token to continue the payment flow

Set up your back-end

2. Charge

Set up your front-end

Kushki.js

Generate a charge token and send it to your back-end

Kushki.js Hosted Fields

Option 1. requestDeviceToken()

Option 2.Secure DeviceToken()

Form creation

Display the CVV field

2.1. Call the `initSecureDeviceToken()` method.

2.2. Call the `requestDeviceToken()` method

Set up your back-end

Cancel a registration (Optional)

3. Test your Integration

4. Prepare your Certification